Achten’s Quality Roofing is proud of their workmanship and quality.
Our goal is to keep standards high and to meet manufacturer, as well
as customer expectations.· Roof installed to manufacturer specifications
· Overall meets company standards
· Air vents installed properly and straight
· Adequate amount per square foot of attic space
· Counter flashing installed and caulked correctly.
· Proper nail patterns
· Skylights/chimneys base flashings properly installed
· Roof free of debris
· Ground clean-up
· Gutter clean-up
· Yard clear of debris (magnet used)
We know that your roof is a large investment and we want to ensure
that the quality is there for years to come.
Your roof is an investment. We, at Achten’s Quality Roofing want you
to feel comfortable with your purchase and your trust in us. We go above and beyond to help you in this process. Our 20 point checklist is just the beginning of what we will look for on your roof, during your free estimate.
We always provide you with a written estimate that is detailed, so
you know exactly what to expect. We want you to be confident that
you are making the right choice by choosing Achten's Roofing.1. Measure for and calculate for proper attic ventilation.
2. Inspect all storm collars at pipes for proper seal.
3. Inspect all valleys for cracks and deterioration.
4. Inspect roof for missing shingle granules.
5. Check gutters, and downspouts for blockage.
6. Inspect fasten method used from original installation.
7. Inspect flashings at all walls.
8. Check for loose shingles.
9. Inspect all pipe flashings for cracks.
10. Inspect all rubber boots at top of pipes for dry rot.
11. Check to see if shingles are brittle, curled or deteriorated.
12. Check all skylight and/or chimney flashings for proper installation and seal.
13. Check the condition of the actual skylights and/or chimney units.
14. Check for soft spots on the roof. (May indicate dry/wet rot)
15. Check in attic space for type of sheeting and condition.
16. Check insulation as well for condition and moisture.
17. Inspect seals on shingle to help prevent wind damage.
18. Inspect attic intake vents for blockage.
19. Inspect for proper shingle overhang at gutters and eves.
20. Check for proper underlayment. (IE. Felt paper)
